Image

Friday, July 1, 2011

Combustion and Flame Class 8

CHAPTER - 6 COMBUSTION AND FLAME Ncert Notes for class 8th

1) Combustible substances :-
Substances which burn in air to produce heat and light are called combustible substances.
Eg :- wood, coal, charcoal, kerosene, petrol, diesel, liquified petroleum gas (LPG), compressed natural gas (CNG) etc.


2) Combustion :-
The chemical process in which a substance reacts with oxygen to produce heat is called combustion.
The substance which undergoes combustion is called a combustible substance. It is also called a fuel.


Air is necessary for combustion.
Sometimes light is also produced during combustion either as a flame or as a glow.

3. Ignition temperature :-
The minimum temperature at which a substance catches fire and burns is called its ignition temperature. 
A substance will not catch fire and burn if its temperature is lower than its ignition temperature.

Different substances have different ignition temperatures.
Eg:- The ignition temperature of kerosene is less than the ignition temperature of wood.

Inflammable substances :  Substances which have very low ignition temperature and can easily catch fire with a flame are called inflammable substances. Eg:- petrol, alcohol, LPG, CNG etc.
4) Conditions necessary for combustion :-
The conditions necessary for combustion are :-
  i) Fuel.
 ii) Air (to supply oxygen).
iii) Heat (to raise the temperature beyond the ignition temperature. 

Note: A substance will not burn without one or more of these conditions. 

5) How do we control fire ? 
The conditions necessary for producing fire are :-
i) Fuel            ii) Air (to supply oxygen)
iii) Heat (to raise the temperature of the fuel beyond its ignition temperature).

Fire can be controlled by removing any one or more of these conditions.
A fire extinguisher cuts off the supply of air or brings down the temperature of the fuel or both and controls the fire.
6) Methods of controlling fire :-
i) By using water :-
Water is the most common fire extinguisher. It can be used only when materials like wood , paper etc. are on fire.
Water cannot be used if electrical equipments are on fire because water conducts electricity and can harm those trying to put out the fire.
Water cannot be used to put out oil and petrol fires because they float on water and continue to burn.


ii) By using carbon dioxide:-
Carbon dioxide is the best fire extinguisher to put out fire caused by inflammable materials like oil and petrol and electrical equipments. Carbon dioxide is heavier than air and it covers the fire and cuts off the supply of oxygen and puts out the fire.
Carbon dioxide is stored at high pressure as liquid in cylinders. Chemicals like sodium bicarbonate (baking soda), potassium bicarbonate produce carbon dioxide near the fire.

7) Types of combustion :-
There are three main types of combustion. They are :-
i) Rapid combustion   ii) Spontaneous combustion    iii) Explosion

Rapid combustion:- is combustion in which a substance burns rapidly and produces heat and light with the help of external heat. Eg:- burning of LPG
Spontaneous combustion:- A combustion in which a substance burns spontaneously and produces heat and light without the help of external heat. Eg:- phosphorus burns spontaneously at room temperature

Explosion:- A combustion in which a substance burns suddenly and produces heat, light and sound with the help of heat or pressure. Eg:- explosion of crackers on applying heat or pressure.
9) Flame :-
Flame :- is the zone of combustion of a combustible substance.  Substances which vapourise during burning produce flames.  Eg:- kerosene, wax etc.
Substances which do not vapourise during burning do not produce flames. Eg:- coal, charcoal etc.

10) Structure of a candle flame :-
A candle flame has three main zones. They are:-
i) Outer zone           ii) Middle zone           iii) Inner zone


In the outer zone complete combustion of the fuel takes place and the colour of the flame is blue and is the hottest part of the flame. It is the non luminous part of the flame.

In the middle zone partial combustion of the fuel takes place and the colour of the flame is yellow and is moderately hot part of the flame. It is the luminous part of the flame.

In the inner zone there are unburnt vapours of the fuel and the colour is black and is least hot part.

11) Types of fuels :-
Fuels are of three main types. They are :-
i) Solid fuels :- Eg:- wood, coal, charcoal etc.
ii) Liquid fuels :- Eg:- kerosene, petrol, diesel etc.
iii) Gaseous fuels :- Eg:- CNG, LPG, biogas, hydrogen etc.


12) Characteristics of a good fuel :-
The main characteristics of a good fuel are :-
i) Is readily available.                               ii) Is cheap. 
iii) Is easy to store and transport.              iv) Burns at a moderate rate.
v) Produces a large amount of heat.         vi) Does not leave behind any undesirable substances.
 vii) Does not cause pollution.

13) Calorific value of a fuel :-
The calorific value of a fuel :- is the amount of heat energy produced on complete combustion of 1 kg of a fuel. The calorific valve of a fuel is expressed in kilojoule per kg.
Calorific values of some fuels in kilojule per kg 
Cowdung cake  6000 - 8000                                  Wood       17000 - 22000
Coal                    25000 - 33000                             Petrol         45000
 Kerosene            45000                                          Diesel         45000
Methane             50000                                          CNG           50000
LPG                   55000                                           Biogas        35000 - 40000
 Hydrogen         150000
Hydrogen has the highest calorific value among all fuels.


14) Harmful effects on the environment due to burning of fuels :-
i) Fuels like wood, coal, petroleum release unburnt carbon particles which cause respiratory diseases like asthma.
ii) Incomplete combustion of fuels release carbon monoxide gas which is a very poisonous gas which can cause death. 
iii) Burning of most fuels release carbon dioxide gas which causes rise in the temperature of the atmosphere. This is called global warming. It causes melting of polar ice, rise in sea level and flooding of coastal areas. 
iv) Burning of coal and petroleum release oxides of sulphur  and nitrogen which dissolve in rain water and forms  acid rain. It is harmful for crops, soil and damages  buildings.

4 comments:

Unknown said...

Wow superrrrrrrrrrrrrrr explanations
Happy new year chemistry add a and team
Wish u all happy life- lahari VIIIB velammal cbse ponneri

Unknown said...

Wow superrrrrrrrrrrrrrr explanations
Happy new year chemistry add a and team
Wish u all happy life- lahari VIIIB velammal cbse ponneri

Cathy Brown said...

I really liked the content. Perhaps, writing more about the flame colours in the presence of Air, and more about hydrocarbon fuels will make this site more informative :)

Unknown said...

shit! man! bad description not atall usefull

Post a Comment

Related Posts Plugin for WordPress, Blogger...